树莓派安装热点分享程序create_ap
将代码clone到本地
sudo git clone https://github.com/oblique/create_ap
cd create_ap
sudo make install
安装依赖的库
sudo apt-get install util-linux procps hostapd iproute2 iw haveged dnsmasq
打开热点(此时,树莓派wifi开着,但没有连wifi)
sudo create_ap wlan0 eth0 热点名 密码
此时不出意外热点将会开启,但是会有warn,可以执行以下代码
sudo create_ap --no-virt wlan0 eth0 m热点名 热点
以服务方式启动,执行开机自启
复制代码
#1.修改服务配置,添加--no-virt参数
sudo vi /usr/lib/systemd/system/create_ap.service
# 将
ExecStart=/usr/bin/create_ap --config /etc/create_ap.conf
# 修改为
ExecStart=/usr/bin/create_ap --no-virt --config /etc/create_ap.conf
#2.默认配置文件/etc/create_ap.conf,将下面两横改为自己的ssid和密码即可,修改自己的dhcp网关
sudo vi /etc/create_ap.conf
# 将
GATEWAY=10.0.0.1
SSID=MyAccessPoint
PASSPHRASE=12345678
# 修改为
GATEWAY=192.168.123.1
SID=dzxj
PASSPHRASE=11111111
# 启动一个服务:
systemctl start create_ap.service
# 关闭一个服务:
systemctl stop create_ap.service
# 重启一个服务:
systemctl restart create_ap.service
# 显示一个服务的状态:
systemctl status create_ap.service
# 在开机时启用一个服务:
systemctl enable create_ap.service
# 在开机时禁用一个服务:
systemctl disable create_ap.service
# 查看服务是否开机启动:
systemctl is-enabled create_ap.service
复制代码
异常一:WARN: brmfmac driver doesn't work properly with virtual interfaces and it can cause kernel panic. For this reason we disallow virtual interfaces for your adapter.For more info: https://github.com/oblique/create_ap/issues/203
ERROR: Your adapter can not be a station (i.e. be connected) and an AP at the same time
处理:sudo nmcli dev dis wlan0
异常二:
sudo create_ap wlan0 eth0 my_raspi 88166908
WARN: brmfmac driver doesn't work properly with virtual interfaces and it can cause kernel panic. For this reason we disallow virtual interfaces for your adapter. For more info: https://github.com/oblique/create_ap/issues/203 WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt Config dir: /tmp/create_ap.wlan0.conf.cDxIozig PID: 1132 Network Manager found, set wlan0 as unmanaged device... DONE/bin/create_ap: line 1669: dnsmasq: command not found
ERROR: Wrong version format!
处理:
sudo yum install dnsmasq -y
异常三:
sudo create_ap wlan0 eth0 my_raspi 12345678
WARN: brmfmac driver doesn't work properly with virtual interfaces andit can cause kernel panic. For this reason we disallow virtual interfaces for your adapter. For more info: https://github.com/oblique/create_ap/issues/203 WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt Config dir: /tmp/create_ap.wlan0.conf.gC5KSqVQ PID: 2497 Sharing Internet using method: nat hostapd command-line interface: hostapd_cli -p /tmp/create_ap.wlan0.conf.gC5KSqVQ/hostapd_ctrl Configuration file: /tmp/create_ap.wlan0.conf.gC5KSqVQ/hostapd.conf
处理:
sudo create_ap --no-virt wlan0 eth0 my_raspi 12345678
Failed to create interface mon.wlan0: -95 (Operation not supported)
create_ap --daemon wlan0 eth0 unknown-5g ldy-user --ieee80211n --ht_capab [HT40+][SHORT-GI-40][DSSS_CCK-40][MAX-AMSDU-3839] --ieee80211ac --vht_capab [VHT80][MAX-MPDU-3895][SHORT-GI-80][SU-BEAMFORMEE] --freq-band 5 --no-virt --country US